Latest Features

Explore the latest MATLAB and Simulink features for wireless design

5G and LTE Mobile Communications Standards

  • NEW 5G support in Wireless Waveform Generator App: Generate NR-TM, and uplink and downlink FRC waveforms using the Wireless Waveform Generator app.

  • NEW Support for PRACH physical channels: Model physical random access channel (PRACH) used in initial system access. 

  • Support for SRS, DM-RS and PT-RS signals: Model 5G signals used for uplink channel sounding, channel estimation and phase tracking.

  • NEW Deep learning data synthesis for 5G channel estimation: Generate deep learning training data for convolutional neural networks (CNN) used in 5G channel estimation.

  • NB-IoT Uplink Shared Channel Modeling: Generate and decode the narrowband Internet of Things (NB-IoT) uplink shared channel

Related Products: 5G ToolboxLTE Toolbox


WLAN and Connectivity Standards

  • NEW System-level simulation Examples: Model an 802.11ax downlink orthogonal frequency-division multiple access (OFDMA) scenario, multiple space-time streams, and 802.11a Minstrel rate adaptation.

  • NEW Support for IEEE 802.11ax Draft 4.1 (Wi-Fi6): Generate high-efficiency single-user null data packets (NDPs) with preamble puncturing, as defined in IEEE® P802.11ax™ Draft 4.1

  • NEW  Link-level simulation of IEEE 802.11ax Trigger-Based Format: Configure, generate, demodulate and decode high-efficiency trigger-based (HE TB) waveforms

  • NEW Blind Signal Recovery and Analysis Example: blindly detect, decode and analyze multiple IEEE 802.11a and IEEE 802.11ax packets in a waveform

  • NEW Bluetooth Low Energy BR/EDR waveform generation and link-level simulation: Generate, demodulate, and decode Bluetooth® basic rate (BR)and extended data rate (EDR) PHY waveforms

  • Bluetooth Support in Wireless Waveform Generator App: Generate and export Bluetooth Low Energy waveforms from the Wireless Waveform Generator app

  • Bluetooth Low Energy (BLE) Examples: Simulate BLE coexistence with WLAN, and perform BLE RF-PHY blocking, intermodulation, and carrier to interference (C/I) performance receiver tests

Related Products: Communications ToolboxWLAN Toolbox

Massive MIMO, Multi-User MIMO, and Beamforming

  • NEW Multiuser Block Diagonalization Beamforming: Compute precoding and combining weights for multiuser MIMO systems

  • Massive MIMO: Simulate an end-to-end MIMO link using hybrid beamforming

  • NEW Transmit and Receive Signals with Unlimited Antennas: Apply WLAN transmission, multipath channel modeling and receiver operations with arbitrary number of antennas and links

  • Wireless LAN: 802.11ad waveform generation with beamforming

Related Products: Antenna ToolboxPhased Array System ToolboxRF BlocksetWLAN Toolbox 

channel modelling.jpg

Channel and Propagation Modeling

  • NEW Ray Tracing Propagation Model: New propagation model using ray tracing method of images with material reflection loss

  • NEW RF propagation using ray tracing: Predict the total received power and generate coverage maps with ray tracing

  • NEW Rain Attenuation Models:  Predict signal attenuation with Global Crane Rain Attenuation and ITU models

  • RF Propagation Visualization with Ray Tracing: Configure and visualize transmitter and receiver sites, buildings, links, ray tracing results, and coverage maps using free-space, terrain, and weather-effects propagation models

  • SINR Visualization: Visualize transmitter site signal-to-interference-plus-noise ratio (SINR) on a map


Related Products: Communications ToolboxLTE ToolboxPhased Array System ToolboxWLAN Toolbox

RF and Digital Front End

  • RF budget analyzer: Use nonlinear harmonic balance analysis to estimate gain, power, and noise of an RF chain, including impedance mismatches

  • Antenna simulation: Model the frequency-dependent impedance and far-field radiation pattern of an antenna

  • S-parameter block: Model frequency response of RF devices using N-port S-parameter data

  • Power amplifiers and DPD: Model wideband and narrowband Pas, including nonlinearity and memory effects, and develop digital predistortion (DPD) linearization algorithms

Related Products: Communications ToolboxRF BlocksetRF Toolbox


Antenna Modeling

Software-Defined Radio

  • Standard-compliant LTE and WLAN: Over-the-air waveform generation and capture

  • USRP E300 Series software-defined radio: Prototype and test wireless system designs on Ettus Research USRP E-300 SDRs

  • ADALM-PLUTO software-defined radio: Prototype and test wireless system designs on Analog Devices PlutoSDR

Related Products: Communications ToolboxLTE ToolboxWLAN Toolbox


Version 3.7, part of Release 2019b, includes the following enhancements:

  • Sensitivity Analysis Tool: Generate MATLAB code from the tool to automate scripting tasks

See the Release Notes for details.

Hardware Design and Verification

  • NEW Wireless HDL Toolbox: Model and simulate hardware implementations of 5G NR, LTE, and multi-standard algorithms and subsystems

  • HDL code generation: Generate and verify HDL efficient HDL code for prototyping and production implementation

  • Verification component generation: Generate SystemVerilog DPI and SystemC TLM verification models


Related Products: Wireless HDL Toolbox5G ToolboxFixed-Point DesignerHDL CoderHDL Verifier

Have Questions About Using MATLAB and Simulink for Wireless Communication

30 Days of Exploration at Your Fingertips